Linux layer 2 bridging can’t do Firewire

Well, it seems and the Linux kernel can’t bridge dissimilar network types, which means I can’t bridge Ethernet and Firewire (workaround until I replace my NIC in my desktop because it fried, having my laptop route for my desktop).

My laptop’s IP is 192.168.2.4
My desktop’s IP is 192.168.2.2
My router’s IP is 192.168.2.1

So, the work around seems to be this…

On the laptop, with eth0 already up:
ifconfig firewire0 up 192.168.2.4
route del -net 192.168.2.0 netmask 255.255.255.0 dev firewire0
route add -host 192.168.2.2 dev firewire0
iptables -F
iptables -P FORWARD ACCEPT
echo 1 > /proc/sys/net/ipv4/conf/all/forwarding


On the desktop:
ifconfig firewire0 up 192.168.2.2
route add default gw 192.168.2.1

To make this permanent, you would edit /etc/networking/interfaces like this…

On the laptop:
auto eth0
iface eth0 inet static
address 192.168.2.4
netmask 255.255.255.0
broadcast 192.168.2.255
gateway 192.168.2.1
post-up ifconfig firewire0 down
post-up ifconfig firewire0 up 192.168.2.4
post-up route del -net 192.168.2.0 netmask 255.255.255.0 dev firewire0
post-up route add -host 192.168.2.2 dev firewire0
post-up iptables -F
post-up iptables -P FORWARD ACCEPT
post-up echo 1 > /proc/sys/net/ipv4/conf/all/forwarding

On the desktop:
auto eth0
iface firewire0 inet static
address 192.168.2.2
netmask 255.255.255.0
broadcast 192.168.2.255
gateway 192.168.2.1